Assembly includes 4 inch submersible pump, motor & starter only.
2m³/h flow ratings
40 liters per min / 0.66 liters per second @ 28m head
35 liters per min / 0.58 liters per second @ 35m head
30 liters per min / 0.5 liters per second @ 46m head
25 liters per min / 0.4 liters per second @ 50m head
This model has a 0.37kw/0.5hp 3-wire (4-core) single 1 phase motor.
Starter Box – 3.6A – 15ufd capacitor
The (optional) Automatic Control Box can be purchased separately. As with the starter box, the Automatic Control Box contains the circuit breaker and capacitor. However, it has the added feature of ‘water level monitoring’ probes. These probes are installed down the bore with the pump and are wired into the control box. If there is not enough water, the system will shut down until the water level in the bore recovers and will allow the system to restart when the water level in the bore recovers. Handy if you don’t know the flow of the bore or have a low yielding bore.
There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump
This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25? Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4? pump down 6? or larger casing.
If using 32mm pipe diameter then a 32 x 100mm (1 1/4? riser) PVC Shroud Adapter would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
3-wire/4 core – 1.5mm sq cable up to 80m. 2.5mm sq cable up to 130m.
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Stainless Steel Support Cable
Available in 3mm cable or 4mm cable
Stainless Steel Support Cable Grips/Clamps
Available in 3mm or 4mm to suit S/S Cable
Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa
Flexible Riser Pipe
Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
As well as the Couplings, ties, joiners and installation roller.
We are an Australian business that ship pumps daily Australia Wide from various locations around Australia with no charge to the customer.
2007 - Started selling OEM Bore Pumps and the business name ...