Edgecam - Mold and Die for sale from G-zerofive

Edgecam - Mold and Die

Supplier: G-zerofive

Edgecam - Mold and Die

Mold and die makers, patternmakers, prototypers and press tool makers alike will all benefit from Edgecam’s breadth of advanced 3 axis machining capability.

802 Recent Views Call for more details

Benefits

Intelligent roughing cycle

Edgecam's roughing cycle generates the optimum strategy to rough machine a component with bosses, pockets and profiles in one easy to use cycle. A laced, concentric or spiral strategy can be implemented with bottom to top intermediate slicing between levels.

This intelligent cycle will automatically apply the most efficient approach move for each region of the model and create trochoidal moves to avoid full width cuts. The cycle automatically adjusts the toolpath for efficient and safe machining, improving cutting conditions and allowing higher machining speeds to be maintained.

Adaptive rest roughing

Edgecam's roughing cycle incorporates rest roughing, where a subsequent roughing strategy can be defined with a smaller tool, only removing material left behind by the preceding larger tool.

Powerful finishing strategies

All finishing cycles offer intelligent lead and link moves.

Parallel Lace and Profiling can be controlled by stepover, cusp height, cut increment, and maximum and minimum angle of cut. Used in combination, a consistent surface finish can be maintained by defining the cut angle. The Check Surfaces option identifies surfaces or face features to be excluded from cutting. This enables the user to independently machine specific features without the need to create boundaries.

The Profiling cycle offers support for undercut machining, which is useful in areas such as the aerospace and automotive industry. Using lollipop or T-slot cutters the cycle offers quick and easy undercut machining without the need for indexing or to tilt the tool. Support for 3D curve geometry offers optimum quality in a single processing step, without the need for costly and time-consuming manual finishing.

The Perpendicular Lace option of the Parallel Lace cycle automatically re-machines the steep regions on the model that would normally leave a poorer finish compared to the rest of the model.

Constant Cusp Finishing generates a 3D toolpath that maintains a constant surface stepover from one pass to the next and ensures consistent cutter forces to generate optimum toolpaths for high speed cutting.

Flat Land Finishing allows the user to machine flat surfaces more efficiently with a flat bottomed cutter.

Projection Finishing techniques offer an excellent solution to match the machining strategy to the shape of the surface or solid, resulting in higher quality machining and reduced cycle times.

Rest finishing

Pencil Milling and Rest Finishing cycles are used to clean up material remaining from a previous finishing cycle, for example cusps left at the end of a Parallel Lace cycle.

This allows the user to employ a larger tool for the majority of the part, then re-machine discreet areas to remove uncut material using a smaller tool. The result is reduced cycle time and improved surface finish.

High speed machining

High Speed Machining (HSM) is a powerful machining method that can deliver faster turnaround and a superior finish. Edgecam cycles are optimized to help you make the most of this technique. Smooth links between levels and regions are implemented and all changes in direction are smoothed, so the machine tool can maintain its feed rate.

Boundary control

All our cycles not only offer the ability to "clip" the toolpath by way of a Boundary, but we also offer the capability for the user to choose different combinations of boundary to tool relationship.

Check surfaces

A common theme throughout Edgecam's suite of machining cycles is the ability to avoid specific areas of the component part. This is achieved through a "Check Surface" This functionality is a "must" when dealing with complex aerospace parts where the machining needs to exert total control over the toolpath.

Features

Advanced machining with intelligence

Edgecam features an extensive suite of advanced 3D cycles that is ideally suited for the rapid generation of optimum toolpaths for all surface and solids machining needs. Irrespective of how complex the model is, Edgecam's advanced machining cycles bring optimised toolpath control, reduced cycle times and an overall higher level of machining efficiency.

To contact G-zerofive about Edgecam - Mold and Die use Get a quote.