There are other accessories that you will need to install your bore pump which include bore cap, drop cable, support cable, riser pipe, pressure gauge, etc. These are listed below Please be sure that your pump and accessory selection is correct before you purchase as the onus is on you. This is why I have included suggestions below with links, to ensure you select the correct size accessories for this model pump.
Options to purchase with your kit to suit this pump:
This model has a 1 1/4 (32mm) discharge thread, so if you are using 32mm pipe diameter then a 1.25″ Bore Cap would be recommended.
A shroud adapter is only needed if you are installing a 4″ pump down 6″ or larger casing. If using 32mm pipe diameter then a 32 x 100mm (1 1/4″ riser) PVC Shroud Adapter would be recommended.
The info below is a guide only, you must check with your electrician on cable size.
3 Phase Cable (3-wire/4 core) – 1.5mm sq cable up to 120m
Always check with your electrician. He will do volt drop calculations to meet site requirements to comply with AS.
Stainless Steel Support Cable
Available in 3mm cable or 4mm cable
Stainless Steel Support Cable Grips/Clamps
Available in 3mm or 4mm to suit S/S Cable
Liquid Filled 63mm – Available in 0-800 kPa, 0-1000 kPa, 0-1600 kPa and 0-2500 kPa
Flexible Riser Pipe
Series 100 is for depths up to 100. The sizes are 32 mm and 50 mm internal diameter.
Series 200 is for depths up to 250m. The sizes range from 40mm to 200mm internal diameter.
As well as the Couplings, ties, joiners and installation roller.
We are an Australian business that ship pumps daily Australia Wide from various locations around Australia with no charge to the customer.
2007 - Started selling OEM Bore Pumps and the business name ...