Gullco International Magnetic Fillet ...
"Low cost, highly efficient automation of out-of-position fillet, lap and butt welding applications"
The Gullco Magnetic Moggy is highly versatile and is ideally suited to a wide variety of welding applications...particularly in "Tee" filler welding where there is not enough room for the carriage to run on the horizontal plate.
The carriage is with speed potentiometer providing infinite speed selection 5.75 to 115 IPM (14.6 to 292.1 cm/in).
Adjustable guide rolls, travel limit switch assembly, vertical and horizontal slides providing 1-3/4” (44.4 mm) adjustment and semi-automatic welding gun holder. Forward/stop/reverse switch, wire feed connector with 15 ft. (4572 mm) control cable, auto wire feed start with delay carriage start and cable support clamp for mounting on handle.
2 models available: Stitch Weld or Continuous Travel Controls
The stitch weld control uses the Gullco micro-processor to provide accurate repeatability for weld distance on and weld distance off, regardless of travel speed. Adjustable carriage start after wire feed start and adjustable wire feed stop after carriage stop. All adjustments visible through LED window.
Adjustable guide roill assemblies ensure accurate gun positioning while the Moggy carriage moves at precisely controlled speeds in forward/reverse direction.
NOTE: When the magnetic “Moggy” is used for out-of-position welding, an anti-fall device must be attached.
To contact Gullco about Gullco International Magnetic Fillet Welding Trackless Carriage | MOGGY use Get a quote.
"Low cost, highly efficient automation of out-of-position fillet, lap and butt welding applications"
The Gullco Magnetic Moggy is highly versatile and is ideally suited to a wide variety of welding applications...particularly in "Tee" filler welding where there is not enough room for the carriage to run on the horizontal plate.
The carriage is with speed potentiometer providing infinite speed selection 5.75 to 115 IPM (14.6 to 292.1 cm/in).
Adjustable guide rolls, travel limit switch assembly, vertical and horizontal slides providing 1-3/4” (44.4 mm) adjustment and semi-automatic welding gun holder. Forward/stop/reverse switch, wire feed connector with 15 ft. (4572 mm) control cable, auto wire feed start with delay carriage start and cable support clamp for mounting on handle.
2 models available: Stitch Weld or Continuous Travel Controls
The stitch weld control uses the Gullco micro-processor to provide accurate repeatability for weld distance on and weld distance off, regardless of travel speed. Adjustable carriage start after wire feed start and adjustable wire feed stop after carriage stop. All adjustments visible through LED window.
Adjustable guide roill assemblies ensure accurate gun positioning while the Moggy carriage moves at precisely controlled speeds in forward/reverse direction.
NOTE: When the magnetic “Moggy” is used for out-of-position welding, an anti-fall device must be attached.
To contact Gullco about Gullco International Magnetic Fillet Welding Trackless Carriage | MOGGY use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product