Heavy-Duty Plate Edge Bevelling | KBM-28 ...
Gullco's KBM-28 & KBM-27U Heavy Duty Portable, Self-Propelled Plate Edge Bevellers produce clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminium plate from 5/16" (8.0 mm) to 2" (50.0 mm) thick.
The KBM-28U bevels the underside of plate eliminating the need to flip the work piece....reducing time and cost.
Savings are further enhanced when both units are usedin applications where both sides of the material require bevelling.
The unit operate at 95 inches (3.5m) per minute. (Top speed can vary depending on bevel depths, voltage and frequency fluctuations).
Adjustable Undercarriage...for Easy Height adjustment. KBM28 & 28U units are supplied with Gullco's exclusive adjustable height self-aligning spring loaded caster wheel assembly for self-propelled bevelling along any length of plate maintaining a un iform bevel and consistent root face.
Angle Bevel Pins...Enable Bevel Angle Adjudtment. KBM-28 & 28U units are supplied with bevel pins for 22 1/2, 30, 37 1/2 and 55 degree bevels. Pins for other bevel angles are available upon request.
To contact Gullco about Heavy-Duty Plate Edge Bevelling | KBM-28 & KBM-28U use Get a quote.
Gullco's KBM-28 & KBM-27U Heavy Duty Portable, Self-Propelled Plate Edge Bevellers produce clean machined bevels with no thermal distortion on mild steel, stainless steel and aluminium plate from 5/16" (8.0 mm) to 2" (50.0 mm) thick.
The KBM-28U bevels the underside of plate eliminating the need to flip the work piece....reducing time and cost.
Savings are further enhanced when both units are usedin applications where both sides of the material require bevelling.
The unit operate at 95 inches (3.5m) per minute. (Top speed can vary depending on bevel depths, voltage and frequency fluctuations).
Adjustable Undercarriage...for Easy Height adjustment. KBM28 & 28U units are supplied with Gullco's exclusive adjustable height self-aligning spring loaded caster wheel assembly for self-propelled bevelling along any length of plate maintaining a un iform bevel and consistent root face.
Angle Bevel Pins...Enable Bevel Angle Adjudtment. KBM-28 & 28U units are supplied with bevel pins for 22 1/2, 30, 37 1/2 and 55 degree bevels. Pins for other bevel angles are available upon request.
To contact Gullco about Heavy-Duty Plate Edge Bevelling | KBM-28 & KBM-28U use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product