VHF Stainless Steel Antennas
Stainless Steel antennas are electrically designed to be used with a ground plane.Best results are achieved when the antenna is mounted in the centre of the vehicle’s roof.
Stainless Steel antennas are generally purchased for their extended life span, as they are capable of handling abusive environments. This characteristic trade-off does although reduce the electrical performance of the antenna in comparison to braided Fibreglass whips.
MODEL A – 206
3.5Ft (1070mm long) ¼ Wave
Stainless Steel Parallel Whip Unity Gain
VHF Low Band 70 to 85 MHz
MODEL A – 206T
3.5Ft (560mm long) ¼ Wave
17-7ph Tapered Stainless Steel
Unity Gain VHF Low Band 70-85 MHz
MODEL A – 207
1.1Ft (560mm long) ¼ Wave
Stainless Steel Whip Unity Gain
VHF High Band 148-175 MHz
MODEL A – 755
Ferrule only to suit any standard VHF26TPI threaded base.This ferrule is fitted with a grub screw adjustment, which allows for the easy replacement of any stainless steel whip.In particular this ferrule was designed to accept the W – 490 tapered, super flexible Larsen Stainless Steel Whip.
MODEL W – 490
Whip only, tapered, super flexible Stainless Steel whip
VHF Low Band 70-85 MHz Unity Gain
To contact Rojone about VHF Stainless Steel Antennas use Get a quote.
Stainless Steel antennas are electrically designed to be used with a ground plane.Best results are achieved when the antenna is mounted in the centre of the vehicle’s roof.
Stainless Steel antennas are generally purchased for their extended life span, as they are capable of handling abusive environments. This characteristic trade-off does although reduce the electrical performance of the antenna in comparison to braided Fibreglass whips.
MODEL A – 206
3.5Ft (1070mm long) ¼ Wave
Stainless Steel Parallel Whip Unity Gain
VHF Low Band 70 to 85 MHz
MODEL A – 206T
3.5Ft (560mm long) ¼ Wave
17-7ph Tapered Stainless Steel
Unity Gain VHF Low Band 70-85 MHz
MODEL A – 207
1.1Ft (560mm long) ¼ Wave
Stainless Steel Whip Unity Gain
VHF High Band 148-175 MHz
MODEL A – 755
Ferrule only to suit any standard VHF26TPI threaded base.This ferrule is fitted with a grub screw adjustment, which allows for the easy replacement of any stainless steel whip.In particular this ferrule was designed to accept the W – 490 tapered, super flexible Larsen Stainless Steel Whip.
MODEL W – 490
Whip only, tapered, super flexible Stainless Steel whip
VHF Low Band 70-85 MHz Unity Gain
To contact Rojone about VHF Stainless Steel Antennas use Get a quote.
Thanks for your help!
Sorry! Unable to submit your request at this time. Please try again later.
Report this product