AAQ Autolift - 2 Post Hoist | AL-9000LS – Clearfloor Heavy Duty 4000kg / 4 tonne Price Guide: $4,675

Supplier: AAQ Australia - Advance AutoQuip

2 Post Hoist | AL-9000LS – Clearfloor Heavy Duty 4000kg / 4 tonne

Designed to withstand the tough conditions of Australian mechanical workshops

Heavy Duty 4T Car Hoist

In Stock

2 Post Hoist – 4000kg / 4 Tonne

The AL-9000LS 2 post hoist has been designed to withstand the tough conditions of Australian mechanical workshops. With a lifting capacity of 4000kg / 4 Tonne, the 2 post car hoist is perfect for lifting 4WD such as Toyota Landcruisers and Nissan Patrols. The 2 post clearfloor hoist allows the use of transmission jacks, oil drainers, and tool chests to be wheeled around freely underneath the vehicle.

Worksafe Design Registered gives you the peace of mind knowing the car hoist complies with Australian Standards 1418.9
Heavy Duty Hydraulic cylinders mounted within the columns drive the lifting carriages for a smooth seamless lift of the vehicle (no chains)
Powerful 2.2kw single or three-phase hydraulic power unit
Safety Locking Ladders fitted to each column (100mm increments) with manual lock release operation
Two-stage screw adjustable pads
Safety Limit Switch cuts out the hydraulic power unit when maximum height is reached.
Low Voltage 24volt controls for added safety

WHAT'S INCLUDED

2 post hoist
M18 concrete anchor through bolts
Single phase 240v 15amp motor / 3 phase 415v 20amp motor
60mm lift adapters
Installation Manual

What’s Not Included?

Installation
Hydraulic Oil
Electrical Connection (Electrician Required)

Workshop requirements

150mm steel mesh reinforced concrete (25-30 MPA)
Minimum Ceiling height of 3.9m (3.65m low height setting)

(Engineered base frames available for 100 – 125mm concrete footing)

Warranty and Certification

5-year structural warranty*
Australian Standard WorkSafe Design Registered

Features

WorkSafe Design Registered
Clear floor design for ease of working with the transmission or under lift jacks, oil drainers or tool chests.
High-quality powder-coated finish
Professional-quality power unit
Safety shut off valve
Long arm two-stage telescopic
Short arm three stage telescopic
Two stage screw adjustable pads
Rubber door protectors
Hydraulic cylinder covers
Easy operation manual lock release
Top limit switch cut-off
4 x 60mm height adapters included

Specifications

Height overall: 3900mm or 3650mm for lower height setting.
Width overall: 3495mm
Lifting height: 1830-1920mm
Lowest height: 90-205mm
Lifting capacity: 4000kg
Power: 240V/50Hz/1Ph (15 Amp) or 415V/50Hz/#Ph (20 Amp)
Gross weight: 750kg
Packing Size: 2850*940*450 mm