AAQ Autolift - 2 Post Hoist | Baseplate Hoist AL-9000DD - 4000kg / 4 tonne Price Guide: $4,125

Supplier: AAQ Australia - Advance AutoQuip

2 Post Hoist | Baseplate Hoist AL-9000DD - 4000kg / 4 tonne

The AutoLift AL-9000DD 2 post baseplate hoist is designed for busy workshops with a lifting capacity of 4000kg / 4 tonnes

Ideal for for busy workshops

In Stock

2 Post Baseplate Hoist – 4000kg / 4 tonne

The AutoLift AL-9000DD 2 post baseplate hoist is designed for busy workshops with a lifting capacity of 4000kg / 4 tonnes and a lifting height of 1925mm with 60mm adaptors fitted (60mm adaptors included). The base plate design of the AL-9000DD is ideal for servicing high roof vans, large 4wds, and SUVs.

Worksafe Design Registered gives you the peace of mind knowing the car hoist complies with Australian Standards 1418.9
Heavy Duty Hydraulic cylinders mounted within the columns drive the carriages for a smooth seamless lifting of the hoist arms
Powerful 2.2kw 15amp single phase hydraulic power unit
Two-Stage Asymmetric telescopic arms fitted with arm locks
Safety Locking Ladders fitted to each column (100mm increments) with manual lock release operation
Two-stage screw adjustable pads
Safety Limit Switch cuts out the hydraulic power unit when maximum height is reached.
Low Voltage 24volt controls for added safety

WHAT'S INCLUDED

2 post hoist complete with 15amp lead and plug (prewired)
M18 concrete anchor through bolts
Single phase/240v 15amp motor
60mm lift adapters
Installation Manual

What’s Not Included?

Installation
Hydraulic Oil

Workshop requirements

150mm steel mesh reinforced concrete (25-30 MPA)
Minimum Ceiling height of 3.4m

(Engineered base frames available for 100 – 125mm concrete footing)

Warranty and Certification

5-year structural warranty*
Australian Standard WorkSafe Design Registered

Features

WorkSafe Design Registered
Easy to operate manual lock release
Economical and reliable
Direct drive high pressure hydraulic cylinder for low maintenance
Automatic arm locking system
Power cable and hydraulic hose inside column
Asymmetric telescope arms
Low voltage control box can be purchased as an optional extra

Specifications

Height overall: 3350 mm (inc. lock ladders)
Width overall: 3495 mm
Drive through width: 2600 mm
Lifting height: 110 -1925 mm
Lifting capacity: 4000 kg
Lifting speed: 50 – 60 seconds
Power: 240V/50Hz/1Ph
Gross weight: 690 kg
Packing Size: 2850*940*450 mm

2 Post Baseplate Hoist – 4000kg / 4 tonne

Worksafe Design Registered gives you the peace of mind knowing the car hoist complies with Australian Standards 1418.9
Heavy Duty Hydraulic cylinders mounted within the columns drive the carriages for a smooth seamless lifting of the hoist arms
Powerful 2.2kw 15amp single phase hydraulic power unit
Two-Stage Asymmetric telescopic arms fitted with arm locks
Safety Locking Ladders fitted to each column (100mm increments) with manual lock release operation
Two-stage screw adjustable pads
Safety Limit Switch cuts out the hydraulic power unit when maximum height is reached.
Low Voltage 24volt controls for added safety