AAQ Autolift - 2 Post Hoist | AL-9500HD Extra High Clearfloor 4500kg / 4.5 tonne Price Guide: $6,160

Supplier: AAQ Australia - Advance AutoQuip

2 Post Hoist | AL-9500HD Extra High Clearfloor 4500kg / 4.5 tonne

This 2 post hoist has been designed to allow high roof vans and 4wds with roof-mounted accessories to be lifted to full height.

Perfect for high roof vans and 4wds

In Stock

2 Post Hoist – 4500kg / 4.5 Tonne Extra-High

The AL-9500HD Heavy-Duty Extra High 2 post hoist has been designed to allow high roof vans and 4wds with roof-mounted accessories to be lifted to full height. With a lifting capacity of 4500kg / 4.5 Tonne, the 2 post car hoist is perfect for lifting 4WD such as Toyota Landcruisers and Nissan Patrols.

Worksafe Design Registered gives you the peace of mind knowing the car hoist complies with Australian Standards 1418.9
Extra-high design gives more room for taller vehicles or vehicles with roof-mounted accessories.
Heavy Duty Hydraulic cylinders mounted within the columns drive the lifting carriages for a smooth seamless lift of the vehicle (no chains)
Powerful 2.2kw 240v single phase or 415v three-phase hydraulic power units available.
Safety Locking Ladders fitted to each column (100mm increments) with manual lock release operation
Two-stage screw adjustable pads and chassis pads included
Safety Limit Switch cuts out the hydraulic power unit when maximum height is reached.
Low Voltage 24volt controls for added safety

WHAT'S INCLUDED

2 post hoist
M18 concrete anchor through bolts
Single phase 240v 15amp motor / 3 phase 415v 20amp motor
60mm lift adapters
Adjustable Pads
Chassis Pads
Installation Manual

What’s Not Included?

Installation
Hydraulic Oil
Electrical Connection (Electrician Required)

Workshop requirements

150mm steel mesh reinforced concrete (25-30)
Minimum Ceiling height of 4.85m (4.6m low height setting)

(Engineered base frames available for 100 – 125mm concrete footing)

Warranty and Certification

5-year structural warranty*
Australian Standard WorkSafe Design Registered

Features

Clear floor design for ease of working with transmission or under lift jacks, oil drainers or tool chests
High quality powder coated finish
Professional quality power unit
Safety shut off valve
Long arm two stage telescopic
Short arm three stage telescopic
Two stage screw adjustable pads
Rubber door protectors
Hydraulic cylinder covers
Easy operation manual lock release
Top limit switch cut-off
4 x 60mm height adaptors & 4WD extensions pads included

Specifications

Height overall: 4850mm or 4600mm for lower height setting
Width overall: 3390mm
Lifting height: 1950-2010mm
Lifting capacity: 4500 kg
Power: 240V/50Hz/1Ph (15 Amp) or 415V/50Hz/3Ph (20 Amp)
Gross weight: 855 kg
Packing Size: 2850*940*450 mm